
From time to time we sell our ex-hire equipment. We may also sell equipment we have taken in a part-exchange.
All our used equipment is thoroughly tested and given an electrical safety certificate before re-sale, giving you a little extra piece of mind.
Items will appear below when they are for sale.
A selection of items from our eBay shop are also listed. Please visit our eBay Shop for more items using the link on the right.
Meyer Sound MSL3 & 650 Sub System with Amps and Controllers.
System Comprises of:
4 x MSL 3
4 x 650 Subs
1 x M3 Amp Rack
1 x B1 Amp Rack.
8 x 10mtr NL4 Speaker Cables
This system was originally purchased in the Mid 80's and was one of the first Meyer Sound systems in the UK.
The MSL-3's are the MK1 Type with the 4 x Piezo Array HF units essential for that Radio 2 sound. 1 x 2' on a 60x40 horn and two phase plugged 12" LF's
The subs are the direct radiating 650-R2's with twin 18" drivers.
The system come complete with two amplifier racks. The Meyer system was unique in it's day. It didn't use standard electronic crossovers, instead they used their own controllers which sensed the output of the amplifier driving the speaker and adjusted the the signal so you couldn't destroy the speaker drivers. The system obviously works as all of the speakers sill have all of their original drivers.
The MSL-3 Rack (M3)
2 x Meyer M3 Controllers
4 x Crest P4801
1 x Patch Panel
12ru Suspended Rack
The 650 Sub Rack (B2)
2 x Meyer B2 Controllers
2 x Crest P6001 Amplifiers
1 x Patch Panel
10ru Suspended Rack
8 x 10mtr NL4 Speaker cables.
I will be honest, the carpet covering on the cabinets has seen better days, but for someone with a bit of time on their hands they could be re-covered and look as good as new.
Replacement kit for repairing Trantec Beltpacks
Kit includes front panel, rear panel, side slide bar
(beltclip, clear plastic screen cover & securing screws not included)
Replacement Belt Clip for Trantec S5.3, S5.5 & S6 Beltpacks
UHF 838 - 862 Mhz
In good condition, some scratches to metalwork, no scratches on screens
1x Dual Receiver avaliable
1x Beltpack also available
Suitable for Trantec S3500, S4000, S4.16 receivers
(can also be used for S5.3 & 5.5 receivers)
Can power upto 5 receivers, or 1 ADU + 4 receivers
Can be mounted on a 1U Rack mount tray.
Input:110/230V ac, 50/60Hz
Output: 4x 12V dc, 400mA [RX]
1x 12V dc, 400mA [ADU/RX]
5x dc power cables included (46cm)
and a UK or Euro mains cable included.
Excellent condition, has been rack mounted, in a flightcase, most of their life.
Suitable for any speaker upto 709mm x 341mm, with a stand mount in the bottom.
New, box opened but never been used.

The FCS-960 is a 30-band graphic equaliser featuring Dual Mode switching between Normal and Fine filter width settings on each channel.
The FCS-960 provides two channels in 3U of rack space. Constant Q-filters with filter-bypass centre taps are controlled by high grade, 45mm faders with moulded polymer fader knobs which eliminate visual parallax error even under low light conditions.
Also included are sweepable/switchable Hi-pass filter, Gain control and electronic balanced inputs and outputs.
Specifications:
Input Connectors (per ch): XLR[F]
Output Connectors (per ch): XLR[M]
Voltage: 90-120 190-250v
Mains: trailing IEC
Weight: 5.4Kg
For more information please visit the manufacturers website
http://www.bssaudio.com/productpg.php?product_id=1
Condition: minor scratches to metalwork, front panel good condition.
Fully tested before sending.
Mono in, Stereo Out
Offering 50 preset effect programs, the SPX900 also provides simultaneous processing of up to 5 effects at one time. With a sampling frequency of 44.1 kHz, it delivers a full frequency response from 20 Hz to 20 kHz. Exceptionally clean, professional quality sound makes the SPX900 the most appropriate choice for sophisticated sound and recording systems
Specifications:
Input Connectors: 1x balanced Jack [+4/-20dB]
Output Connectors: 2x balanced Jack [+4/-20dB]
MIDI: In + Out/Thru
Remote: 6pin DIN
Voltage: 110 - 240v
Mains: trailing IEC
Weight: 4.2Kg
For more information please visit the manufacturers website
http://usa.yamaha.com/products/live_sound/processors/spx900/?mode=model
Condition: minor scratches to metalwork, front panel good condition.
Fully tested before sending.
24bit Dual Channel Processor
FX, Reverb, Delay, Echo
Powered by Lexicon’s proprietary Lexichip™, the MPX 500 has 240 presets with classic reverb
programs such as Ambience, Plate, Chamber and Inverse, as well as Tremolo, Rotary, Chorus,
Flange, Pitch, Detune, 5.5 second Delay and Echo. Dual-channel processing gives you two
independent effects in a variety of configurations: Dual Stereo (Parallel), Cascade, Mono Split and
Dual Mono.
A large graphics display and dedicated Edit knobs give you instant access to each preset’s
parameters and an easy Learn mode allows MIDI patching of front panel controls. In addition, tempocontrolled
delays and modulation rates lock to Tap or MIDI clock, and Tap tempos can be controlled
by audio input, the front panel Tap button, dual footswitch, external MIDI controller or MIDI Program
Change.
Other features include a software-selectable MIDI OUT/THRU port, pushbutton or footswitch
selection of dry or muted audio output and a built-in power supply.
Specifications:
Input Connectors (per ch): XLR[F] & Balanced Jack
Output Connectors (per ch): XLR[M] & Balanced Jack
S/PDIF In: 1x Phono
S/PDIF Out: 1x Phono
MIDI: In, Out/Thru
Footswitch: Jack
Voltage: 100 - 240v
Mains: IEC
Weight: 2.5Kg
For more information please visit the manufacturers website
http://www.lexiconpro.com/product_downloads/126/manuals/MPX500_User_Guide_Rev1.pdf
Condition: minor scratches to metalwork, front panel good condition.
Fully tested before sending.
NP3TT-1 connectors
Dual 48way Patch Bay, wired to 4x EDAC
Dual 48way Patch Bay, wired top to bottom & parrallels
15x Patch Cables (2')
7x Patch Cables (3')
Good physical condition, some minor scratches to metalwork.
Contacts may need cleaning.
Cables show some tarnishing & wear.
Total Weight 8.9Kg
Most compressor/gates provide less than musical compression, coupled with gating that swallows transients—or closes early, cutting off decay and reverb tails. The superb engineering in the 166XL ensures that both its compression and gating provide versatility and excellent sonic performance in situations where other compressor/gates typically produce undesirable processing artifacts.
When using the 166XL’s Attack and Release controls, artists and engineers will find that the center settings deliver classic dbx compression, while the full control range produces voicings that extend from slow “leveling” to aggressive “peak” limiting.The 166XL’s advanced gate circuitry uses a completely new, program-dependent timing algorithm to produce ultra-smooth release characteristics—even with complex signals, such as voice or reverb decays. dbx engineers went on to take advantage of the wide dynamic range and high precision of the dbx V1 VCA to design in an extra-wide threshold range and ensure top gating performance for each application.
2x Mono Channels or Stereo Link
Specifications:
Input Connectors (per ch): XLR[F] & Balanced Jack (+4/-10dB)
Output Connectors (per ch): XLR[M] & Balanced Jack (+4/-10dB)
Side Chain Insert: Balanced Jack
Voltage: 230v
Mains: IEC
Weight: 2.7Kg
For more information please visit the manufacturers website
http://www.dbxpro.com/166xl/
Condition: minor scratches to metalwork, front panel good condition.
Fully tested before sending.
with Peak Meter Bridge (MB1000) and Flightcase
In full working order, slight scratches to front edge and sides.
No broken knobs or faders.
Screen excellent condition, no scratches of missing pixels.
Plastic facia missing from one side of the screen.
Flightcase excellent.
Firmware version 2.4